This filler is designed for today’s high-tech metals. Formulated with superior adhesion to galvanized steel, bare steel and aluminum.
The Substrates: ORION Galaxy 26-513 BODY FILLER can be applied to:
Cold Rolled Steel
Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Surface must be thoroughly dry before repairing or applying material.
Keep the repair area small. Use 40-80 grit to remove the paint and featheredge.
Stir the filler before using. Knead the cream hardener.
Measure hardener 2% by weight (add a ribbon of cream hardener from edge
to edge across the center of a 4” diameter puddle).
Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.
Approximate setting time is 3-5 minutes @ 72°F
Apply in layers with even firm pressure.
Do not apply all at once.
Rough shape with 40 – 80 grit (as needed)
Sand filler with 80 grit or finer
Final sand repair and paint edge 180 grit.
The Fine Print:
Never return mixed filler to can
Keep can closed and store in a cool dry place, Use with cream hardener only.