Menu
Cart 0
Tamco Retarder - Flo n Go

Tamco Retarder - Flo n Go

  • $29.95
  • Save $3


Universal Retarder

2 oz per sprayable quart.

Tamco's Flo N Glow retarder is a specialty product that slows down the catalyzation of 2K products like clears, urethane primers and single stage colors. ... This is a ready-to-spray blending agent used to melt the edge of 2K urethanetopcoats.

 

MIXING: 1. Shake thoroughly before using. 2. ready to spray. 3. Application must be performed using a two-gun method. The first gun will contain either a Single Stage or Clearcoat system, and the second gun will contain Tamco's FLO N Glow 1K Ready to Spray Color Blender used to melt the wet edge of the blend. 4. Using the two gun method, adjust air pressure of the second gun containing the FLO N Glow 1K Ready to Spray Color Blender to 20-25 psi for conventional gravity or siphon feed, and 5 psi at the cap for HVLP. 5. Spray 1-2 even wet-on-wet coats to melt in the outer edge of the Single Stage color or Clearcoat at a gun distance of 5”- 7”. Recommended dry film thickness is 0.2-0.5 mil. Allow FLO N Glow 1K Ready to Spray Color Blender to dry overnight. If force drying/baking, allow panel(s) to cool down before polishing blended area.

Single Stage Applications If FLO N Glow 1K Ready to Spray Color Blender is used with Single Stage colors apply the Single Stage paint over the repaired area carrying out the wet edge just beyond the repair, and then allow the Single Stage paint to flash per recomendation. Apply a second coat to achieve proper hiding and blending of the color into the repaired area and lightly feather the outer edge. Immediately after feathering the final coat, melt the feathered edge with a wet-on-wet application using FLO N Glow 1K Ready to Spray Color Blender.

 

Basecoat - Clearcoat Applications If FLO N Glow 1K Ready to Spray Color Blender is used with a Tamco Urethane Clearcoat, apply one coat of clear just beyond the edge of the repaired area, allowing the Clearcoat to flash per recommendation. Apply a second coat of clear carrying out the wet edge just beyond the first pass of clear and lightly feather the outer edge. Immediately after feathering the final pass of clear, melt the feathered edge with a wet-on-wet application using FLO N Glow 1K Ready to Spray Color Blender.


We Also Recommend